(1) Realize high-precision, high-quality threaded hole processing When using taps for thread cutting, the accuracy of the bottom hole often occurs, resulting in reduced thread accuracy and surface roughness.

Using a thread milling cutter: It can ensure a large chip removal space, and because it is the relationship of milling, it can achieve high-precision, high-surface roughness threaded hole processing.

(2) Stabilization and Rationalization of Threaded Hole Machining The taps that have been widely used in the past may cause failures such as chipping during cutting. The thread mill can achieve stable cutting due to the unique characteristics of the thread. Chamfering and threading of drilled bottom holes will also be possible using the same*.

(3) In case of breakage, it is easy to clear it. The biggest problem when using taps for threaded hole processing is the clearing operation at the time of breakage. Even in the event of a breakage, the thread mill can be easily removed.

The durability of thread mills is ten times or even ten times that of taps;

A thread milling cutter can process a variety of internal and external threads with different rotation directions;

For threads that do not allow transition buckle or undercut structure, it is difficult to process by traditional turning methods or taps and die, but it is very easy to achieve by CNC milling;

The tap cannot be used after it is worn out, and the thread milling cutter can continue to be used through tool compensation after it is worn out;

For threaded holes with the same pitch and different thread sizes, several taps need to be replaced, and the thread milling cutter can be used in general;

The machining efficiency of the thread milling cutter is much higher than that of the tap;

Some irregular workpieces cannot be clamped on the lathe, and thread milling can be realized on the machining center;

The thread will be broken when tapping, which will cause waste of time and even scrap the workpiece. The thread milling cutter will not be broken due to non-human reasons, and even if it is broken, it can be taken out manually in time;

The machining finish is much higher than that of the tap;

When machining larger threaded holes, the tap cannot be reached, and the thread milling cutter can realize it instantaneously;

The last setting of the machining center can complete multiple processes, avoiding the replacement of machine tools;

Lower cutting force;

No escape slot required;

The above is all the sharing today about the processing efficiency of thread milling cutter is much higher than that of thread tapping. I hope it will be helpful for everyone to use this equipment in the future.